The card free rotary cutting machine is now widely used. Many wood processing and non card rotary cutting machine is inseparable. If you want higher quality veneer, please use the card free rotary cutter, because it can bring higher efficiency to your work. So it is required to set the cutting process correctly when using the non card rotary cutting machine. What should we pay attention to when using the tool without card?

1. No matter what kind of equipment is used, the safety of employees is very important. When using the non card rotary cutting machine, first of all, be familiar with the operation of the equipment. Operators should not drink alcohol before working. Please check the safety condition before use. Make sure that the components are installed correctly. Familiar with the operation of the machine. Items not related to the equipment shall be removed from the equipment.

2. When cutting to the end, use a small wooden shaft or other object to cut off the remaining wooden shaft. Do not use wooden poles by hand to avoid danger. Check the condition of the machine regularly to make sure it operates reliably to avoid collision. When the machine is damaged, it is usually necessary to clean and maintain the equipment. Add lubricating oil to the lubricating parts regularly to ensure the normal operation of the rotary cutting machine and improve the efficiency of the enterprise.

3. It is very important to adjust the cutting current of plasma power supply when cutting workpiece with non card rotary cutting machine. It is an important cutting process parameter, which directly determines the thickness and speed of cutting, i.e. cutting capacity, as well as production. This is a very critical step in the production process.

4. If the cutting process parameters are not set, the increase of the cutting current of the rotary cutting machine without card will be displayed directly. With the increase of plasma arc energy, cutting capacity and cutting speed are increased. Therefore, the operator should correctly select the cutting current and the corresponding nozzle according to the thickness of the material before cutting, so as to ensure that the plywood produced is more in line with the needs of users.

The rotary cutting machine of wood processing equipment is widely used and has won the favor of users. However, when using the non card cutting machine, the user must deeply understand and master the process parameters in order to achieve high-quality rapid cutting. If the accuracy of plywood produced by unfamiliar cutting process parameters is not high, only in this case can the non card rotary cutting machine play a role, and the cut workpiece will achieve a very good effect, then the plywood produced will naturally meet the high accuracy requirements.