8-foot veneer cutting machine is a common veneer lathe, which is the core equipment used by veneer production enterprises. Veneer cutting machine often uses the size of wood segment to classify.

According to the size range of veneer cutting wood section, veneer cutting machine can be divided into three types: large, medium and small. The length of rotary cutting wood section of large rotary cutting machine is 2000-2700 mm, and the diameter is 1600 mm. The length of rotary cutting wood section of medium rotary cutting machine is 1350-1950 mm, and the diameter is 200-800 mm. The length of rotary cutting wood section of small rotary cutting machine is generally less than 1000 mm , diameter below 400mm.

According to the driving mode of the main motion, the veneer cutting machine can be divided into the spindle driving type and the cylindrical driving type. If it comes from the spindle driving type, it can be divided into the mechanical and hydraulic types according to the different structure of the jam. The mechanical chuck rotary cutting machine is a single chuck rotary cutting machine, which is complex in structure and easy to maintain, but it has high labor intensity and low plate out rate The hydraulic clamping shaft can be divided into single shaft and double shaft. The hydraulic double shaft rotary cutting machine has high degree of automation, convenient operation, small core diameter, high output rate and good veneer quality. The secondary is to be used in large and medium-sized enterprises. The wood section in the non shaft rotary cutting machine is driven by the friction roller, with small core diameter and high output rate High, mainly used for re cutting wood core.